Vox Tonelab EX Manuel du propriétaire télécharger pdf (Page 26)

NOTE: The equalizer is unavailable if an amp model you selected is turned off.

NAMING A PROGRAM

Here’s how you can name a program.

NOTE: The program name is saved as part of each program. If you switch to a different program or

turn off the power before you save, your settings will be lost.

1. Press the RENAME button.

2. Use the √√

√√

, ®®

®®

buttons to move the cursor to the character you want to change (the selected

character blinks), and use value knob 6 or the ▲, ▼ buttons to change the character.

You can use the following characters.

3. Repeat step 2 to ﬁnish entering a name for your program.

4. When you’ve ﬁnished entering a name, press the EXIT/TUNE button (4.8) to return to the

mode you were in.

STORING A PROGRAM

When your tweaking has resulted in a sound you’re happy with, store (write) it!

1. Press the WRITE button (4.7).

The name display (3.1) shows “*WRITE*” and the bank display (3.4) and one of program

LEDs 1–4 will blink.

2. Use value knob 6 (2.2) or the ▲, ▼ buttons (4.2) to select the bank you want to use, and use

the √√

√√

, ®®

®®

buttons to select the destination program (1–4).

For example if you want to store your program in 9-1 (bank 9, program 1), use value knob 6

or the ▲, ▼ buttons to make the bank display show “9,” and then use the

√√

, ®®

®®

buttons to

make the program 1 pedal LED blink.

HINT: You can also select the store-destination program by using the BANK UP/DOWN switches or

the program 1–4 select buttons.

3. Press the WRITE button (4.7) once again.

The name display will indicate “COMPLETE.” Your program is now stored, and you’ll be back

in Program Select mode.

NOTE: The program is written over the previous contents of that bank/program. The program that pre-

viously occupied the number you selected in step 2 will be erased.

NOTE: If you decide not to store your new program, press the EXIT/TUNE button (4.8) to cancel the

procedure.

NOTE: If you switch to a different program or turn off the power without storing the program you edited,

your changes will be lost.

RESTORING A SETTING TO ITS ORIGINAL VALUE

The Original Value icon in the value display (3.3) gives you a way to ﬁnd out the parameter val-

ues that are stored in a program.

When you are using a knob or button to change the value of a parameter, the ORIG (original value)

icon will appear when the value you are adjusting matches the “original value” stored in the program.

HINT: So, you’re ﬂipping through the programs on your new ToneLab LE, and you come across one

you really like. It’s easy to ﬁnd out exactly what settings are dialed in to get such an awesome

tone — just use this Original Value display feature!

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 58 59

Commentaires sur ces manuels

Pas de commentaire

Vox Tonelab EX Manuel du propriétaire Page 26

Commentaires sur ces manuels

Produits connexes et manuels pour Pédale de musique Vox Tonelab EX