Vox Tonelab EX Manuel du propriétaire télécharger pdf (Page 51)

TunerPedals

MIDI/DIGITAL

Factory

settings

Trouble-

shooting

Spec.Program

List

Control via MIDI

IDI stands for Musical Instrument Dig-

ital Interface, and is a world-wide

standard for exchanging various types

of musical data between electronic

musical instruments and computers. When MIDI

cables are used to connect two or more MIDI

devices, performance data can be exchanged

between the devices, even if they were made by

different manufacturers.

ToneLab LE can use MIDI to communi-

cate in the following ways with another MIDI

device. You can:

• Operate ToneLab LE to switch programs on an

external MIDI device, or switch ToneLab LE

programs from an external MIDI device.

→“Program change”

• Operate a connected optional foot controller to

control an external MIDI device, or use an

external MIDI device to control ToneLab LE’s

volume or effects. →“Control change”

• Use Sound Editor to edit parameters.

→“Parameter change”

• Backup (save) and restore (load) ToneLab LE

program data. →“Backing up and restoring

program data”

NOTE: In order to do the above things, you need to

use a MIDI cable to connect ToneLab LE and

your external MIDI device, and set the MIDI

channels appropriately. →“Connecting a MIDI

device or computer,” “Setting the MIDI chan-

nel”

NOTE: When you change the settings described in

this section, they will be saved automatically.

When you have ﬁnished making settings, sim-

ply press the EXIT/TUNE button (4.8) to return

to the mode you were in.

NOTE: If your external MIDI device does not recog-

nize certain types of MIDI messages, those

messages cannot be used for control. Check

the “MIDI implementation chart” of ToneLab LE

and of your external MIDI device.

CONNECTING A MIDI

EVICE OR COMPUTER

If you want to control an external MIDI device from

ToneLab LE, connect a MIDI cable from ToneLab

LE’s MIDI OUT jack to the MIDI IN jack of your

external MIDI device

If you want to control ToneLab LE from a MIDI

sequencer or other external MIDI device, con-

nect a MIDI cable from your external MIDI

device’s MIDI OUT jack to ToneLab LE’s MIDI IN

jack.

When you connect ToneLab LE with a MIDI

sequencer or sound editor, data will normally be

sent in both directions, so you will need to con-

nect MIDI cables from ToneLab LE’s MIDI OUT

jack to the external MIDI device’s MIDI IN jack,

and from the external MIDI device’s MIDI OUT

jack to ToneLab LE’s MIDI IN jack.

NOTE: You will need a MIDI interface in order to con-

nect your computer with ToneLab LE.

Some USB-MIDI interface devices may not be

able to transmit/receive the ToneLab LE’s MIDI

exclusive messages.

ETTING

THE

MIDI M

ESSAGE

SETTING THE MIDI CHANNEL (GLO-

BAL “MIDI CH”)

In order to exchange data with an external MIDI

device, ToneLab LE’s MIDI channel must match

the MIDI channel of your external MIDI device.

Here’s how to set the MIDI channel.

1. Press the GLOBAL button (4.6).

The name display (3.1) will show “MIDI CH.”

If a different parameter is selected, press the

√√

, ®®

®®

buttons (4.3) to change the display.

Use the value knob 6 (2.2) or the ▲, ▼ but-

tons (4.2) to set ToneLab LE’s MIDI channel.

4. Set the MIDI channel of your connected

external MIDI device.

For details on how to set the MIDI channel

of your external MIDI device, refer to its

owner’s manual.

PROGRAM CHANGE (GLOBAL “PCHG

OUT”)

When you switch programs on ToneLab LE, a

program change message is transmitted from the

MIDI OUT jack, causing an external MIDI device

ToneLab LE

MIDI IN MIDI OUT

MIDI IN

MIDI OUT

To a MIDI sequencer/

computer

MIDI interface

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 57 58 59

Commentaires sur ces manuels

Pas de commentaire

Vox Tonelab EX Manuel du propriétaire Page 51

Commentaires sur ces manuels

Produits connexes et manuels pour Pédale de musique Vox Tonelab EX