Vox Tonelab EX Manuel du propriétaire télécharger pdf (Page 25)

IntroductionPanel TourSetupPlayingCreating

and Storing

8. To adjust the reverb mix amount, use value knob 6 which controls the MIX parameter.

In the same way for PEDAL, MODULATION, and DELAY effects, use the selector to choose

an effect and the value knobs to adjust the parameters.

HINT: In some cases, it’s easier to adjust the PEDAL effect if modulation, delay, and reverb are not

being applied. If you’re using the PEDAL effect, it’s best to make your amp and cabinet settings

ﬁrst, and then adjust the pedal effect before the other effects.

NOTE: For some of the models, the name of the actual parameter you will be editing may differ from

what is printed in the parameter line of the edit section. The name that appears in the display

when you operate a value knob is the actual name. For details on parameters refer to p.34.

9. If you want to continue making adjustments, simply press the select button for the model

you want to edit, and turn the value knobs.

HINT: If the EXP-CTL-CHAIN button lights when you operate a value knob, you have the option of

assigning that parameter to an expression pedal. If you press and hold the EXP-CTL-CHAIN

button for at least one second, the parameter will be assigned to the expression pedal (EXP).

(We call this the Expression Pedal Quick Assign function.) For example if you set the PEDAL

model selector to U-VIBE and use value knob 1 to adjust the SPEED parameter, the EXP-CTL-

CHAIN button will light to indicate that you can use the above method to assign the SPEED

parameter to the expression pedal. For details, refer to p.47.

NOTE: If you’ve used the PEDAL selector to select VOX WAH, the MANUAL parameter will automati-

cally be assigned to expression pedal (EXP), letting you use the pedal as a wah pedal.

10. If you notice that the volume level of a speciﬁc program is different from that of other pro-

grams and you wish to adjust the level, press the CAB button while holding down the AMP

button, then turn the PROG LVL knob (value knob 6). You can also apply this procedure if

some effect settings cause sound clipping.

HANGING

THE

CONNECTION

ORDER

THE

FFECTS

(CHAIN)

You are free to change the order in which the modulation effect, delay effect, and reverb effect

are connected.

The effect connection order is saved independently for each program.

1. Press the EXP-CTL-CHAIN button, then use the √ and ® buttons to make the value knob 6

LED blink. The current connection order is displayed.

2. Use value knob 6 or the ▲, ▼ buttons to change the order.

Display Connection order

MD-DL-RV modulation→delay→reverb

MD-RV-DL modulation→reverb→delay

DL-MD-RV delay→modulation→reverb

DL-RV-MD delay→reverb→modulation

RV-MD-DL reverb→modulation→delay

RV-DL-MD reverb→delay→modulation

USING THE THREE-BAND EQUALIZER

If you selected “Ln2” for the “AMP/LINE” setting, you can use the three-band equalizer to adjust

the overall tonal characteristics of the sound output from ToneLab LE.

When you select “Ln2” for the “AMP/LINE” setting, the value knobs 2–6 feature the following functions:

NOTE:

The equalizer is unavailable if you selected “AP1,” “AP2,” “AP3,” or “Ln1” for the “AMP/LINE” setting.

Value knob 2 “TRIM” Adjusts the input level.

Value knob 3 “LO GAIN” Adjusts the amount of low-range boost.

Value knob 4 “MID FREQ” Speciﬁes the mid-range frequency.

Value knob 5 “MID GAIN” Adjusts the mid-range boost.

Value knob 6 “HI GAIN” Adjusts the high-range boost.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 58 59

Commentaires sur ces manuels

Pas de commentaire

Vox Tonelab EX Manuel du propriétaire Page 25

Commentaires sur ces manuels

Produits connexes et manuels pour Pédale de musique Vox Tonelab EX